Summary
Overview
Work History
Education
Skills
Certification
Timeline
Generic

Sanjay Mhatre

Senior Operation Technologist
Millennium Towers Harmony CHS Ltd, Sector-9, Sanpada, Navi Mumbai,Maharashtra

Summary

Total Experience: 25 years. At present working with EQUATE Petrochemical Co Ltd, Kuwait since May2009. Experience of 14 years with Reliance Industries Limited, at various levels. Graduate in Chemical Engineering. Diploma in Chemical Engineering from Board of Technical Education Maharashtra State. Diploma in Computer applications from Mumbai University. I had worked with India’s Largest private sector company m/s RELIANCE INDUSTRIES LTD in petrochemical division, where I am responsible for operation of steam operated turbines, plat former & crystallizer, distillation column, oil fired heater, , effluent treatment plants and storage tanks(Tank Farm). I am an engineer having good leadership, better relationship & hard working Qualities. The co-ordination and team spirit are well honed by experience of 14 years working with motivated team. I offer myself as a suitable candidate for the above post. I am highly energetic & hardworking person. I am looking forward for an opportunity to serve your organization and I am sure that my abilities would receive full cognizance to your requirements. Dedicated Refinery professional with history of meeting company goals utilizing consistent and organized practices. Skilled in working under pressure and adapting to new situations and challenges to best enhance the organizational brand. Offers strong interpersonal and task prioritization skills.

Overview

27
27
years of professional experience
4
4
years of post-secondary education
2
2
Certifications
1
1
Language

Work History

Senior Operation Technologist

Aromatics Department
Kuwait, Ahmadi
05.2009 - Current
  • CCR/Platformer/Recovery Plus/CSP/PSA/Isomer/Xylene Fractionation/PAREX)
  • Company : EQUATE Petrochemical, , KUWAIT
  • Looking after DCS Panel operations for Area 1 and Area 3 ; Shift Production & , control and co-ordinates operation of production facilities like Continuous Catalyst Regeneration (CCR), PSA for H2 Production, Platformer, Naphtha Hydrotreater Recovery plus, Isomer, Xylene Fractionation, Parex Chambers (All unit are based on UOP licensor)
  • Job profile:
  • Supervise the production facilities and equipment for maintenance & handovers it safely to allow for maintenance program to be conducted
  • Ensures that equipment preparation and start up procedures are strictly observed
  • Monitors the running of such equipment and reports anomalies if detected
  • Supervises safe plant startup / shutdown and handle Emergencies, troubleshooting of the plant
  • Initiate, Installs and removes temporary Interlock bypasses to support the business need
  • Ensures inspection and corrosion protection programs are implemented
  • To attends tailgate meetings with shift teams for track and update on production & safety issue
  • Issue hot/cold and confined space entry work permits for all routine/planned maintenance work to be carries out in accordance with EQUATE working procedures and safety policy
  • Preparation of Startup /Shutdown procedures of new equipment, Special job schemes & Preparation of Emergency Rescue procedure, Shutdown planning, P&ID reviews
  • Participates in the analysis, design and planning for plant modifications or new facilities/ equipment
  • Development of Safety procedure and HAZOP’s & system for handling of hazards and explosive chemical, hazards identification, Safety training, inspection, safety audit, organizing safety meeting, statutory regulatory authorities
  • Liaisons with Govt
  • Agencies like factory inspectors
  • Fulfills all the statutory compliances applicable to organization
  • Carrying out job specific Risk assessment & LOPA
  • To prepare daily production report to monitor plant and highlights abnormalities and suggests corrective actions
  • Evaluate operational concerns and propose corrective actions
  • Recommends/review new installations or modifications to improve existing facilities
  • Study new ideas and innovative technologies to enhance plant operation, reliability, profitability, or performance
  • Develop/review chemical cleaning, major equipment performance, and piping modification procedures
  • Did Pre-commissioning, Commissioning & Fresh Start up of the aromatics plant & Expertise with UOP, USA people
  • Currently Handling the products like Reformate, LPG ( Liquefied Petroleum Gas ) ,PX( Para Xylene ),BZ ( Benzene),H2 ( Hydrogen), Light Naphtha (C5+) & Hydrogen sulphide ( H2S) & Fuel Gas
  • Actively participated in Turnaround 2017 for catalyst revamp for Platforming reactor and Adsorbent Chamber in Parex Unit complete revamp for ADS-47 commissioning
  • Responsibilities at EQUATE:
  • Perform DCS panel Operations for CCR cyclemax for Platformer licensed by UOP
  • Maintain records as per ISO standards
  • Maintain highest standards of Process Safety
  • Smooth plant operations of Platformer Cyclemax, Recovery Plus, PSA, CSP,NHT,HNUU
  • Mentor local candidates in Operations of Oil and Gas Industry
  • Performing additional role of Shift EH&S Focal point to sustain EQUATE Safety standards throughout plant Duties included Safety of Plant, Personnel, Society and Environment at large
  • Familiar with the working principle, commissioning, trouble shooting and maintenance of the following
  • Fired Heater (Natural or Balanced draft), Pump, Compressor (Reciprocating & centrifugal), Vessel, Valve, Heat Exchanger, Fin Fan cooler, Distillation Column, Storage Tank, Ejector, Flare etc.
  • Pilot Operated Pressure Safety Valve, Control valve, Fire Extinguisher, Foam system
  • Operation of Balanced & natural Draft type’s heater fire heater supplied by M/s Petro-Chem, Canada with latest BMS panel
  • Successfully commissioned (Olefin Reduction Process) ORP project in Area 3 and Recovery Plus revamp which with the addition of liquid absorber had significantly increased LPG as well as Hydrogen production
  • Safety Work Permit System (Hot, Cold & CSE)
  • HAZOP/LOPA/SIL, MCMS (Machine conditioning & monitoring system ) & Bentley Nevada
  • Equipment Handled:
  • Centrifugal Compressor steam and motor driven, Steam turbine, Turbo Expander, Reciprocating compressor, Absorption columns, Adsorbers Regenerators, Feed Gas Separators, Stabilizer column, , Heaters, , De-butanizer distillation columns, Naphtha Splitter column Fin fan coolers, Rotary valve and Various Heat exchangers
  • Plant equipped with ABB distributed control system and PLC base operation
  • Multi Variable controller
  • SD systems
  • ACCS as well as CRCS from UOP
  • Oversaw daily operations to ensure high levels of productivity
  • Used critical thinking to break down problems, evaluate solutions and make decisions
  • Worked to maintain outstanding attendance record, consistently arriving to work ready to start immediately
  • Worked flexible hours; night, weekend, and holiday shifts
  • Demonstrated respect, friendliness and willingness to help wherever needed

Senior Production Executive

Responsibilities in Reliance Industries Ltd
Mumbai, Maharashtra
06.2006 - 05.2009
  • Handling parallel 7.5MW steam turbine driven GHH MANN turbo compressor and electrical motor of 5.5 MW SULZER compressors Handled all three phases’ i.e. Solid /liquid/gas in petrochemical plant; Handling day to day PTA plant operations Experienced in operating plant having varied mass transfer operations and compressor systems Familiar with Advanced Process Controllers and Compressor control systems.; manual operations Reporting to senior managers with daily production reports and troubleshoots any deviations. Provide assistance in unit commissioning
  • Commissioning Exposure: Actively participated in the Pre-commissioning and Commissioning Activities of M.A Hydrolysis
  • Plant Credits: Catalyst loading and spent catalyst unloading in accordance to Standard Operating Procedures. Have good leadership qualities in decision making in emergencies and also follow- up of the activities with good team work in multi-lingual atmosphere.
  • Equipment Exposure: Faced different Troubleshooting with different types of equipment of different manufacturers Compressors, Pumps and Blowers with different types (Centrifugal and reciprocating with single and multistage)Ith different drives (Motor, Gas Turbine and Steam Turbine) with different Seals (Dry gas and Hydraulic);With different Manufacturers ( Dresser Rand, Siemens, MAN GHH).Steam Turbines: Fully Condensing. Condensing by Fully Surface condensers and Partly by Fin Fan coolers. Converters and Reactors: Worked with Fixed bed reactors. Worked with Tubular Catalytic Reformers; Furnaces: Worked with bottom fired furnaces; Worked with Natural Draught and Balanced Draught Furnaces; Worked with liquid fuel, Gas Fuel Burners Distillation Columns: With different types of Tray Columns Activities Performed During Pre- commissioning:
  • Steam Blowing, Hydro testing, Chemical Cleaning, Air Blowing, Leak testing, Hot oil Flushing, Furnace boil out. Air Run of Compressor for blowing of all lines with Hot Air. Catalyst Loading of Reactors, Reformers, Dryers and Cold Box
  • Responsibilities held: Monitoring of equipment, Parameters and conditions.
  • Stabilizing the plant during emergencies & Troubleshooting Safe Start ups and Shut downs of the plant (DCS/Field)Maintaining safety by managing the fire fighting until incident controller and Fire brigade enter the effected area
  • HSE activities like periodical site inspection, necessary safety measures, attending & actively participating in safety meeting Maintaining House keeping in the work area
  • On-job training to the trainees assigned .Reporting the process deviations in Field problems to the Manager/In charge Responding to the reports given by Lab, Inspection, immediately Carrying out duties assigned to me by the Manager/In charge Monitoring and Recording Control room and Field readings, and reporting to the in charge/Manager whenever they contact Following ISO-9001, ISO-14001 AND ISO-18001 procedures and maintaining the process without deviations to maximum extent .
  • Computer skills: Chemical engineering related : Aspen plus, UNISIM HYSIS IP21, HTRISOFFICE, VISIO etc.
  • OPERATING SYSTEMS : Windows 9, 10
  • I have undergone specialized training of UNISIM HYSIS from CPC simulation. Experienced Aspen Hysis version 8.6, :Pre-Commissioning and Commissioning of PTA Plant: of 800T/D process by ICI (UK) consists of Process Air Compressor, Reaction, Solvent Recovery, Separation, and Hydrogen Generation Area. I was part of the team which implemented APC(Advance Process Control) .To train new recruits in operations of Petrochemical Industry To maintain records as per ISO standards. ESD systems Smooth operations of Paraxylene and Purified Terephthalic acid (PTA) plant .As Panel Superintendent Responsibilities included leading a team of 10 Plant Operators, Technicians in a shift to meet Production Targets, Troubleshooting, Coordinating Maintenance activities, and Planning shutdown activities Duties included Safety of Plant, Personnel, Society and Environment at large I have thorough knowledge of Chemical plant operations and maintenance procedures, safety procedures, troubleshooting, DCS operation Sound knowledge of SAP as a Power User for SAP MM and PP transactions Issue of Process Work Orders, Raising Notification, Indenting Raw material Equipment Handled in PTA plant Compressor steam and motor driven, Steam turbine, CSTR, Distillation column, Dryers Fin fan coolers, Absorbers, Centrifuges, Vacuum Filters, Crystallizer, High Speed Pumps, and Incinerator Plant equipped with ADVANT ABB distributed control system and PLC base operations Duties Included in PTA plant: Commissioning activities of Compressors, Dryers, Day Tanks, Distillation Columns, Incinerator, charging of Catalyst in CSTR and Fixed Bed Reactor. Hydrotreating
  • Responsibilities included in paraxylene plant:Worked in 500 TPD Paraxylene & 90 TPD LPG Plant as “DCS Panel Superintendent Process by UOP consist of Naphtha prefractionation, Naphtha Hydro treating, Plat forming, Catalyst continuous regeneration, Isomer, Tatory, Xylene fractionation, Parex, Oily water separation, Sour water treatment units operations and LPG plant covers Feed gas treatment, feed gas compression, De-ethanizer, Debutanizer, Chiller compressor operations
  • Equipments handled in Paraxylene plant: Turbine driven recycle gas centrifugal compressor, centrifugal/sundyne/reciprocating pumps, super heater, reciprocating compressor, vaporizer, distillation columns, Natural draft & forced draft fired heaters Plant equipped with ADVANT ABB distributed control system and PLC based operation Duties included in Paraxylene plant: Worked as executive member of the commissioning team involved in commissioning of LPG plant which includes chemical cleaning, Gritt blasting, hydro testing, and catalyst loading/unloading operation of Plat former & Isomer reactors Commissioning of Chiller unit, De-ethaniser,De-butanizer distillation columns section,LPG feed gas compression section,LPG feed gas chloride treater,LPG loading
  • Responsibilities included in Tank farm: Worked in Tank Farm Area as a Console Operator
  • Responsibilities included material receipt, dispatches, storage tank inventory, handling pipeline material, Floating roof tanks Loading unloading of tankers.
  • Commercial activities like Excise, Gate Pass, weigh bridge under ERP of SAP MM module
  • Overall work experience as follows: Pre-Commissioning activities like, Conventional and Non-Conventional cleaning/flushing/drying/leak testing of pipelines and vessels Plant troubleshooting handled like partial power failure, total power failure, instrument air failure, steam failure, cooling water failure, DCS failure Conversant of day-to-day Production activities/Quality control specification Plant start up and shutdown activities with standard operating procedures/conditions Monitoring process parameter & Quality Specification Troubleshooting of plant upsets Monitoring and Implementing safety practices in plant Mass & Energy balance, collecting process data's, production planning to achieve Production targets. Handling day to day PTA plant operations
  • Experienced in operating a plant having varied mass transfer operations and compressor systems
  • Familiar with Advanced Process Controllers and Compressor control systems.; manual operations Reporting to senior managers with daily production reports and troubleshoots any deviations. Provide assistance in unit commissioning
  • Commissioning Exposure: Actively participated in the Pre-commissioning and Commissioning Activities of M.A Hydrolysis Plant
  • Credits:
  • Catalyst loading and spent catalyst unloading in accordance to Standard Operating Procedures.„
  • Have good leadership qualities in decision making in emergencies and also follow- up of the activities with good team work in multi-lingual atmosphere.
  • Equipment Exposure:
  • Aced different Troubleshooting with different types of equipment of different manufacturers
  • Compressors, Pumps and Blowers:
  • Worked with different types (Centrifugal and reciprocating with single and multistage)
  • Worked with different drives (Motor, Gas Turbine and Steam Turbine)
  • Worked with different Seals (Dry gas and Hydraulic);With different Manufacturers (Dressor Rand, Siemens, MAN GHH).Steam Turbines: Fully Condensing. Condensing by Fully Surface condensers and Partly by Fin Fan coolers. Converters and Reactors:
  • Worked with Fixed bed reactors.
  • Worked with Tubular Catalytic Reformers; furnaces:
  • Worked with bottom fired furnaces;
  • Worked with Natural Draught and Balanced Draught Furnaces;
  • Worked with liquid fuel, Gas Fuel Burners
  • Distillation Columns :With different types of Tray Columns
  • Activities Performed During Pre-Commissioning:
  • Team Blowing, Hydro testing, Chemical Cleaning, Air Blowing, Leak testing, Hot oil Flushing, Furnace boil out. Air Run of Compressor for the blowing of all lines with Hot Air
  • Catalyst Loading of Reactors, Reformers, Dryers and Cold Box
  • Responsibilities held:
  • Monitoring of equipment, Parameters and conditions.
  • Stabilizing the plant during emergencies & Troubleshooting
  • Safe Start ups and Shut downs of the plant (DCS/Field)
  • Maintaining safety by managing the fire fighting until incident controller and Fire brigade enter the effected area
  • HSE activities like periodical site inspection, necessary safety measures, attending & actively participating in safety meeting
  • Maintaining House keeping in the work area
  • On-job training to the trainees assigned to me
  • Reporting the process deviations in Field problems to the Manager/In charge
  • Responding to the reports given by Lab, Inspection, immediately
  • Carrying out duties assigned to me by the Manager/In charge
  • Monitoring and Recording Control room and Field readings, and reporting to the in charge/Manager whenever they contact
  • Following ISO-9001, ISO-14001 AND ISO-18001 procedures and maintaining the process without deviations to maximum extent.
  • Computer skills:
  • Chemical engineering related : Aspen plus, UNISIM HYSIS IP21, HTRI
  • SOFFICE, VISIO etc. OPERATING SYSTEMS : Windows 9, I have undergone specialized training of UNISIM HYSIS from CPC simulation. Experienced Aspen Hysis version 8.6, :
  • Pre-Commissioning and Commissioning of PTA Plant: of 800T/D process by ICI (UK) consists of Process Air Compressor, Reaction, Solvent Recovery, Separation, and Hydrogen Generation Area. I was part of the team which implemented APC(Advance Process Control) .To train new recruits in operations of Petrochemical Industry
  • To maintain records as per ISO standards. ESD systems
  • Smooth operations of Paraxylene and Purified Terephthalic acid (PTA) plant .As Panel Superintendent Responsibilities included leading a team of 10 Plant Operators, Technicians in a shift to meet Production Targets, Troubleshooting, Coordinating Maintenance activities, and Planning shutdown activities
  • Duties included Safety of Plant, Personnel, Society and Environment at large
  • I have through knowledge of Chemical plant operations and maintenance procedures, safety procedures, troubleshooting, DCS operation
  • Sound knowledge of SAP as a Power User for SAP MM and PP transactions
  • Issue of Process Work Orders, Raising Notification, Indenting Raw material
  • Equipment Handled in PTA plant
  • Compressor steam and motor driven, Steam turbine, CSTR, Distillation column, Dryers Fin fan coolers, Absorbers, Centrifuges, Vacuum Filters, Crystallizer, High Speed Pumps, and Incinerator
  • Plant equipped with ADVANT ABB distributed control system and PLC base operations
  • Duties Included in PTA plant:
  • Commissioning activities of Compressors, Dryers, Day Tanks, Distillation Columns, Incinerator, charging of Catalyst in CSTR and Fixed Bed Reactor. Hydrotreating
  • Responsibilities included in paraxylene plant:
  • Worked in 500 TPD Paraxylene & 90 TPD LPG Plant as “DCS Panel Superintendent Process by UOP consist of Naphtha prefractionation, Naphtha Hydro treating, Plat forming, Catalyst continuous regeneration, Isomer, Tatory, Xylene fractionation, Parex, Oily water separation, Sour water treatment units operations and LPG plant covers Feed gas treatment, feed gas compression, De-euthanizer, Debutanizer, Chiller compressor operations
  • Equipment handled in Paraxylene plant:
  • Turbine driven recycle gas centrifugal compressor, centrifugal/sun dyne/reciprocating pumps, super heater, reciprocating compressor, vaporizer, distillation columns, Natural draft & forced draft fired heaters
  • Plant equipped with ADVANT ABB distributed control system and PLC based operation
  • Duties included in Paraxylene plant: Worked as executive member of the commissioning team involved in commissioning of LPG plant which includes chemical cleaning, Gritt blasting, hydro testing, and catalyst loading/unloading operation of Plat former & Isomer reactors
  • Commissioning of Chiller unit, De-ethaniser,De-butanizer distillation columns section,LPG feed gas compression section,LPG feed gas chloride treater,LPG loading operation
  • Responsibilities included in Tank farm: Worked in Tank Farm Area as a Console Operator
  • Responsibilities included material receipt, dispatches, storage tank inventory, handling pipeline material, Floating roof tanks
  • Loading unloading of tankers. Techno Commercial activities like Excise, Gate Pass, weigh bridge under ERP of SAP MM module
  • Overall work experience as follows:
  • Pre-Commissioning activities like, Conventional and Non-Conventional cleaning/flushing/drying/leak testing of pipelines and vessels
  • Plant troubleshooting handled like partial power failure, total power failure, instrument air failure, steam failure, cooling water failure, DCS failure
  • Conversant of day-to-day Production activities/Quality control specification
  • Plant start up and shutdown activities with standard operating procedures/conditions
  • Monitoring process parameter & Quality Specification
  • Troubleshooting of plant upsets
  • Monitoring and Implementing safety practices in plant
  • Mass & Energy balance, collecting process data's, production planning to achieve Production targets.
  • Conducted research, gathered information from multiple sources and presented results
  • Increased customer satisfaction by resolving issues
  • Delivered [Product or Service] to customer locations within specific timeframes

Plant Operator and Production Executive

Reliance Industries Ltd,Patalganga
Mumbai, Maharashtra
01.1995 - 05.2009
  • Adjusted and maintained plant equipment for safety and performance
  • Recorded inside and outside process readings on daily log sheets
  • Conducted safety inspections and followed safety rules and procedures
  • Directly supervised all truck rack and assist loaders
  • Recorded gas volumes and processed analyzer readings
  • Retrieved and performed required tests for quality and integrity on product samples
  • Monitored flows, pressures, chemical feeds levels and water quality indicators
  • Performed minor mechanical work and routine equipment maintenance
  • Procured materials and supplies to complete daily tasks
  • Retained tank levels and flow rates to meet water demand
  • Loaded and unloaded treatment plant chemicals
  • Followed plant safety procedures, rules and regulations
  • Enforced security of plant entrances by checking identification and recording names of visitors
  • Made appropriate repair recommendations for malfunctioning equipment
  • Operated specialized tools, instruments and equipment for tests and maintenance
  • Knowledgeable of machine maintenance in order to troubleshoot effectively
  • Operated equipment such as front-end loaders, forklifts and slakers regularly
  • Executed water main and hydrant repairs, valve maintenance and water meter change-outs
  • Maintained adequate water storage tank levels and pressures to meet water demand
  • Disinfected water with chemicals such as ammonia and chlorine in exact concentrations
  • Adhered to EPA and OSHA regulations
  • Monitored SCADA system for problems and adjusted controls to maintain efficiency
  • Developed deep understanding of regulatory requirements concerning quality, reporting standards, emergency notifications, permit renewals and inspections
  • Measured and adjusted chemical feed rates
  • Collected water samples to test alkalinity, hardness and residual levels
  • Handled preventive and corrective maintenance to maintain proper equipment safety and functionality
  • Adjusted pumping systems, chemical feeders, auxiliary equipment, control systems storage tank levels and pump stations indicators
  • Evaluated procedures and results for accuracy and to determine appropriate next steps
  • Implemented process changes
  • Oversaw plant treatment unit process, immediately identifying and mitigating issues

Production Executive

Reliance Industries Ltd, Patalganga
Mumbai, Maharashtra
01.1999 - 06.2006
  • Directed team of 10 employees focused on producing Paraxylene.
  • Wrote standard operating procedures and adjusted policies to meet changing demands
  • Met regularly with production team and managers to analyze problems and plan cost-effective and high-quality product delivery
  • Reviewed production reports to spot and correct issues early
  • Organized repair and routine maintenance of production equipment
  • Recommended process improvements to enhance product quality
  • Developed new ways of manufacturing and improved existing manufacturing processes

Production Executive

Reliance Industries Ltd, Patalganga
Mumbai, Maharashtra
01.1997 - 01.1999
  • Here I have worked for front end process
  • Handled equipments such as reactors, distillation columns compressors; hot oil heater; rotary valve, heat exchangers etc
  • Worked for Paraxylene plant as Process Field operator which is divided in eight sections: 1) Naphtha prefractionation 2) Naphtha hydrotreating 3) Platforming 4) Continuous Catalyst Regeneration 5) Xylene fractionation 6) Parex 7) Isomar 8) Tatory section
  • His plant is devided in different areas ; I have worked for 7.5 years in Area -1
  • Have worked for Area-01 which includes startup / shutdown with SOP Prefractionation, Naphtha Hydrotreating, Platformer , CCR, Recycle gas compressor as well as LPG generation .
  • Improved operations through consistent hard work and dedication
  • Quickly learned new skills and applied them to daily tasks, improving efficiency and productivity
  • Resolved conflicts and negotiated mutually beneficial agreements between parties
  • Used Microsoft Word and other software tools to create documents and other communications
  • Developed and maintained courteous and effective working relationships
  • Prepared a variety of different written communications, reports and documents to ensure smooth operations
  • Carried out day-day-day duties accurately and efficiently
  • Participated in continuous improvement by generating suggestions, engaging in problem-solving activities to support teamwork
  • Conducted research, gathered information from multiple sources and presented results

Production Executive

Reliance Industries Ltd
Mumbai, Maharashtra
01.1995 - 01.1997
  • I have over 14 years’ experience in the field of, start up and operation of PETROCHEMICAL plant
  • Worked for Tank Farm as Plant operator where responsibilities included materials receipt, dispatches, storage tank inventory, handling pipeline material
  • Worked for LAB plant as Process Field operator divided in Front End and Back End; Front End where Normal Paraffin is extracted from kerosene by UOP Molex process which comprises a) Prefractionation b) Hydrobon c) Molex; Back End comprises of Prefractionation, Pacol and Alkylation where LAB is produced from linear olefins
  • Improved operations through consistent hard work and dedication

Education

DIPLOMA - CHEMICAL ENGINEERING

Board of Technical Education
Raigad Polytechnic, Lonere
04.1992 - 05.1994

B.E - Chemical Engineering

I.I.T
IIT MUMBAI
04.2006 - 08.2008

Skills

Production Supervisor, Refinery Console Operator and field technologist

undefined

Certification

DCS Console Certifications for Aromatics Area 1 and Area 3

Timeline

Senior Operation Technologist

Aromatics Department
05.2009 - Current

Senior Production Executive

Responsibilities in Reliance Industries Ltd
06.2006 - 05.2009

B.E - Chemical Engineering

I.I.T
04.2006 - 08.2008

Production Executive

Reliance Industries Ltd, Patalganga
01.1999 - 06.2006

Production Executive

Reliance Industries Ltd, Patalganga
01.1997 - 01.1999

Plant Operator and Production Executive

Reliance Industries Ltd,Patalganga
01.1995 - 05.2009

Production Executive

Reliance Industries Ltd
01.1995 - 01.1997

DIPLOMA - CHEMICAL ENGINEERING

Board of Technical Education
04.1992 - 05.1994

DCS Console Certifications for Aromatics Area 1 and Area 3

Unisym Hysis Certification

Similar Profiles

  • Francisco Martinez

    Francisco MartinezFrancisco Martinez

    Lead Production Supervisor at Aromatics, Inc.Lead Production Supervisor at Aromatics, Inc.

    View Profile
  • Oshima Oshima

    Oshima OshimaOshima Oshima

    R&D Lab Assistant at New Directions AromaticsR&D Lab Assistant at New Directions Aromatics

    View Profile
  • Hirakkumar Patel

    Hirakkumar PatelHirakkumar Patel

    Industrial Hygienist at Oriental Aromatics LtdIndustrial Hygienist at Oriental Aromatics Ltd

    View Profile
Sanjay MhatreSenior Operation Technologist