Summary
Overview
Work History
Education
Skills
Certification
Languages
References
Hobbies and Interests
Timeline
Generic
Vishvas Pratap

Vishvas Pratap

Patna

Summary

A dynamic professional experience in Lifting & Rigging operations More than 10 years. Well versed with all laws, international safety rules & regulations for rigging & lifting activities & able to make lifting plan & Primavera P6, Microsoft project. Ability to work effectively in foreign environment, sites-based or office-based, independently or as part of a team and work under pressure of extreme workload.

Professional rigging specialist with solid experience in overseeing lifting operations and ensuring safety and efficiency on job sites. Adept in coordinating teams, utilizing rigging equipment, and ensuring compliance with industry standards. Strong focus on teamwork and adaptability, consistently delivering reliable results in dynamic environments. Skilled in problem-solving, load calculations, and equipment maintenance, with emphasis on achieving operational success.

Overview

10
10
years of professional experience
1
1
Certification

Work History

Rigging Supervisor

Arabi Enertech K.S.C (KNPC-KUWAIT)
08.2022 - Current
  • Supervise all routine & non-routine (Simple, Complex, Tandem) lifting operations.
  • Where appropriate direct lifting operations, offering clear instructions to those involved.
  • Check the lifting plan or rigging plan to ensure that it is performed properly.
  • Coordinate the rigging- foreman and riggers for any critical lifting activities.
  • Typical activities like Emergency Shutdown inside the station include Erection and Installation of Boiler, Pump, Heat Exchanger, Cooler, Heater, Vessel, Tank, Compressor, Air Dryer, Structural Support, Column, Beam, CS spool and pipeline Section, Valve, heavy Equipment’s, OHL Poles, Transformer Using Crane 30/50/95/160/350/700 Ton.
  • Improved rigging safety by conducting regular equipment inspections and maintenance.
  • Managed scheduling and planning of rigging activities, optimizing resource allocation across multiple projects.
  • Reduced downtime on job sites through proactive problem-solving and troubleshooting skills.
  • Developed customized rigging solutions for complex projects, ensuring successful outcomes.
  • Enhanced crew efficiency through clear communication and collaboration with team members.
  • Ensured compliance with OSHA regulations through diligent monitoring of team adherence to safety protocols.
  • Spearheaded continuous improvement initiatives within the rigging department, driving higher standards of performance across all aspects of operations.
  • Conducted thorough risk assessments prior to commencing any work activities, mitigating potential workplace hazards.
  • Completed rigging projects within budget by effectively managing resources and materials.
  • Mentored new hires, instilling strong work ethics and providing hands-on guidance in performing tasks safely and efficiently.
  • Maintained a clean and organized work site, promoting overall safety and efficiency among the crew.
  • Championed safety culture within the team by being a role model for safe working practices and encouraging open dialogue about potential safety concerns.
  • Implemented preventative maintenance programs for rigging equipment, reducing repair costs over time.
  • Communicated effectively with clients to address concerns or questions about ongoing projects, fostering positive relationships.
  • Collaborated closely with engineers on load calculations, guaranteeing secure lifting operations throughout each project phase.
  • Coordinated with crane operators to ensure accurate lifts, enhancing project completion rates.
  • Ensured proper load distribution during lifting operations, minimizing the risk of accidents.
  • Oversaw daily operations at site, keeping team production moving at optimal pace.
  • Inspected equipment and tools used for safe operation.
  • Prepared and submitted reports on job progress and safety conditions to upper management.
  • Created and implemented plans to maximize efficiency of workers.
  • Trained workers in proper methods, equipment operation and safety procedures.

Lifting Supervisor

AL TASNIM ENTERPRISES LLC (PDO-OMAN)
10.2019 - 06.2022
  • Secure work permit as per PDO work permit system PR: 1172 and SP-2329.
  • Secure work with follow the PDO procedure and specification such as SP-2273 and SP-2275.
  • Have sufficient technical, practical and theoretical training, knowledge and experience of the work being carried out.
  • Have a valid ABA certification as lifting supervisor or a crane supervisor.
  • Be briefed and instructed on the outcomes of the risk assessment and fully understand the requirements of the lifting plan for the lifting operation to be carried out and an understanding of all those involved in the task.
  • Monitor a sufficient number of lifting operations to ensure correct working practices are being followed.
  • Perform tool box meeting before starting the activities regarding safety and how to perform the job in safety manner
  • Erection of steel structures for new loading and pipe rack using 50 tons cranes
  • Expedited project timelines with effective scheduling of personnel, equipment, and materials according to project requirements.
  • Improved workplace safety by conducting regular equipment inspections and maintenance for all lifting equipment.
  • Contributed to the development of company-wide lifting strategies that aligned with organizational goals and industry best practices.
  • Minimized risk of accidents through the diligent enforcement of safe working practices among all crew members.
  • Facilitated smooth transitions between project phases by coordinating closely with other supervisors and departments to ensure seamless handoffs.
  • Maintained accurate records of all lifting activities, ensuring compliance with regulatory requirements and facilitating continuous improvement efforts.
  • Implemented rigorous incident reporting procedures that allowed for prompt investigation into any accidents or near-misses involving lifting operations.
  • Ensured timely project completion through efficient coordination of daily lifting operations and effective resource allocation.
  • Optimized crane selection process by assessing load-bearing capacities, reach limits, and other specifications in relation to job needs.
  • Conducted thorough pre-lift meetings with crew members to review safety protocols and clarify roles in the upcoming operation.
  • Developed comprehensive lift plans that accounted for ground conditions, load sizes, wind speeds, and other critical factors to ensure successful outcomes.
  • Maintained safe work environment and confirmed current compliance with OSHA and other governmental regulations.

Lifting Coordinator

TRF Limited
05.2017 - 09.2019
  • Supervision and Execution of all lifting related activity.
  • Make Daily Accomplishment Report to be submitted on a daily basis.
  • Conduct safety orientation before work start to ensure safe working condition of each in every members.
  • Prepare individual time sheet of every employee and continuously take feedback from workforce and submit to our site management.
  • Prepare daily plan as per site requirement and fulfil all the client requirement.
  • Assist Underground pipeline lowering activities
  • Maintained organized records of all active listings, ensuring easy access for team members and clients.
  • Streamlined listing processes for increased productivity, utilizing organizational skills and attention to detail.
  • Reduced time spent on administrative tasks, implementing efficient systems for managing paperwork and correspondence.
  • Reviewed design specifications critically for accuracy, identifying potential issues before they escalated into costly delays or rework situations.
  • Resolved conflicts efficiently among team members, fostering a positive work environment that contributed to successful outcomes.
  • Reviewed plans and inspected ongoing construction to keep work in line with project goals.

Site Junior Engineer

JUSCO
08.2015 - 03.2017
  • Daily supervision and coordination with manpower and site management.
  • Daily progress report submits to planning department.
  • Overall planning and monitoring of resource, cost, material and machinery for various activity or operations & create billing cost with client.
  • Lowering & Back-fill
  • Perform internal calibrations for welding machines and monitor the calibration due date for the gauges and equipment’s.
  • Ensured compliance with safety regulations during all phases of project implementation, resulting in zero incidents or accidents onsite.
  • Reduced production costs by implementing cost-saving measures in materials procurement and manufacturing processes.
  • Collaborated with engineering team to determine project specifications.
  • Evaluated existing systems and processes to identify areas for improvement, leading to increased operational efficiency across projects.
  • Studied corrections from senior engineers to learn and grow professionally.
  • Organized and led project meetings, ensuring clear communication and alignment of project objectives.
  • Enhanced team collaboration by implementing centralized communication platform.

Education

Diploma - Mechanical Engineering

Punjab Technical University
05.2015

10th - undefined

BIHAR SCHOOL EXAMINATION BOARD
06.2011

Skills

  • Lifting Plan- AUTOCAD
  • LEEA
  • Primavera-P6
  • Microsoft Project
  • Project coordination
  • Project management
  • Communication and coordination
  • Team leadership qualities
  • Permit to work
  • Hazard identification
  • Workplace safety
  • Training and mentoring
  • MS Excel & MS Word
  • Friendly, positive attitude

Certification

  • Rigging Supervisor, BUREAU VERITAS August 2022 — August 2024
  • Work Permit Executor, Kuwait National Petroleum August 2022 — August 2025
  • Confined Space Entrant, Kuwait National Petroleum August 2022 — August 2024
  • Lifting Supervisor, ABA-UK January 2021 — January 2023
  • Slinger/Signaler, ABA-UK January 2021 — January 2023
  • First Aid CPR AED, National Training Institute, Oman October 2019 — October 2023
  • Permit To WORK, Petroleum Development Oman October 2019 — October 2023

Languages

English
Hindi
Arabic

References

Soundrya Rajan, +965 50987602, Arabi Enertech K.S.C

Praveen,               +965 51053677,  Arabi Enertech K.S.C

Sazid Raja,           +968 60977052,  Al Tasnim LLC

Hobbies and Interests

Cricket, Football, Swimming

Timeline

Rigging Supervisor

Arabi Enertech K.S.C (KNPC-KUWAIT)
08.2022 - Current

Lifting Supervisor

AL TASNIM ENTERPRISES LLC (PDO-OMAN)
10.2019 - 06.2022

Lifting Coordinator

TRF Limited
05.2017 - 09.2019

Site Junior Engineer

JUSCO
08.2015 - 03.2017

10th - undefined

BIHAR SCHOOL EXAMINATION BOARD

Diploma - Mechanical Engineering

Punjab Technical University

Similar Profiles

CREATE PROFILE
Vishvas Pratap